MARQ Gen 2 Poppet- VIS Engine Maintenance Kit
If any of your Field One Paintball Acculock Inserts are damaged for any reason, we’ll replace it with the same or similar insert for as long as you own your kit. Just return your damaged insert to Field One Paintball at the address below with your name, address, contact info and a copy of your purchase receipt or other proof of purchase. Also include a check for $7 USD payable to Field One Paintball to cover shipping and processing.
Send your damaged insert to:
Field One Paintball
Attn: Acculock Replacement Program
34 De Luca Place Suite D
San Rafael, CA 94901
This offer is only valid for the original owner and is not transferable. Limited to one replacement of each insert per customer. Offer void where prohibited or otherwise restricted by law. Field One Paintball LLC reserves the right to modify or discontinue the terms of the Acculock Lifetime Insert Replacement Program at any time. Program does not apply to product requiring shipping outside of the United States.
Thanks again for your support. If you have any questions about the AccuLock Barrel System, please feel free to contact us by phone or email.
This kit provides spare o-rings for the common maintenance areas of the marker plus spare screws, springs and detents. See below for description of contents and installation location. To view the Gen 2 MARQ instruction manual click HERE.
|Marq Poppet (VIS Engine) Maintenance Kit- Spares for the common maintenance areas of the marker plus spare screws, springs and detents|
|1x3mm O-Ring||6||Solenoid to Manifold to Body|
|1x4mm O-Ring||2||Grip Frame to Body|
|1x4.5mm O-Ring||2||ASA to Grip Frame|
|1x6.5mm O-Ring||2||LPR to Body|
|1x7.5mm O-Ring||2||SC Only Outside of Poppet Shaft Rear|
|1x12mm O-Ring||2||Outside of Blast Guide|
|1x14mm O-Ring||2||Back Block to Ram Housing|
|006 O-Ring||8||Outside of Ram Housing|
|007 O-Ring||4||Outside of Ram Housing(Tight!)|
|008 O-Ring||4||Ram/ Poppet Shaft|
|011 O-Ring||2||Rear of Ram|
|012 O-Ring||2||LPR Piston|
|013 O-Ring||2||Inside of Ram Housing|
|014 O-Ring||2||Inside of Front Volume Chamber|
|016 O-Ring||2||HPR Piston|
|020 O-Ring||2||Inside of Volume Chamber Rear|
|021 O-Ring||4||Outside of Volume Chamber|
|Screw for grip panel||2|
|Screw for eye board||2|
|Screw for eye cover||2|
|Ball detent with spring||2|
|Packaging: Small Black Plastic Box|