Force Battery Door- Method Developments *NEW*
Acculock Lifetime Insert Replacement Program
If any of your Field One Paintball Acculock Inserts are damaged for any reason, we’ll replace it with the same or similar insert for as long as you own your kit. Just return your damaged insert to Field One Paintball at the address below with your name, address, contact info and a copy of your purchase receipt or other proof of purchase. Also include a check for $7 USD payable to Field One Paintball to cover shipping and processing.
Send your damaged insert to:
Field One Paintball
Attn: Acculock Replacement Program
34 De Luca Place Suite B
San Rafael, CA 94901
This offer is only valid for the original owner and is not transferable. Limited to one replacement of each insert per customer. Offer void where prohibited or otherwise restricted by law. Field One Paintball LLC reserves the right to modify or discontinue the terms of the Acculock Lifetime Insert Replacement Program at any time. Program does not apply to product requiring shipping outside of the United States.
Thanks again for your support. If you have any questions about the AccuLock Barrel System, please feel free to contact us by phone or email.
-F1 Team
This replacement Force Battery Door was designed by Method Developments to provide a replacement battery door that is easily removed from the Field One Force foregrip without a tool.
Features Include:
- Tool-Less Removal Design
- Phosphorus Bronze teeth
- Ability to be disassembled while in the marker, if an internal failure were to happen. Eliminating the need for drill out methods.
Installation:
- Slide the lock to retract the teeth
- Insert into foregrip
- Allow slide to go back to locked position
Removal:
- While holding the slide to the unlocked position, push in on the door to compress the battery springs. This will unload the locking teeth and allow them to be retracted.
- While still holding the slide to the unlocked position, stop pushing against the battery springs and allow the door to be pushed out of the foregrip.
If the retraction O-Ring breaks:
- Remove the two lower screws to disassemble the Battery Door
- Replace 1mm x 6mm O-ring
- Reassemble