Onslaught, Insight, Phase Complete O-Ring Rebuild Kit
Acculock Lifetime Insert Replacement Program
If any of your Field One Paintball Acculock Inserts are damaged for any reason, we’ll replace it with the same or similar insert for as long as you own your kit. Just return your damaged insert to Field One Paintball at the address below with your name, address, contact info and a copy of your purchase receipt or other proof of purchase. Also include a check for $7 USD payable to Field One Paintball to cover shipping and processing.
Send your damaged insert to:
Field One Paintball
Attn: Acculock Replacement Program
34 De Luca Place Suite B
San Rafael, CA 94901
This offer is only valid for the original owner and is not transferable. Limited to one replacement of each insert per customer. Offer void where prohibited or otherwise restricted by law. Field One Paintball LLC reserves the right to modify or discontinue the terms of the Acculock Lifetime Insert Replacement Program at any time. Program does not apply to product requiring shipping outside of the United States.
Thanks again for your support. If you have any questions about the AccuLock Barrel System, please feel free to contact us by phone or email.
-F1 Team
This kit provides 1 complete o-ring rebuild for the marker and Cam Drive ASA. See below for description of contents and installation location. To view the Onslaught/ Insight NG instruction manual click HERE.
| Onslaught/Insight Complete O-Ring Rebuild Kit- Provides one complete o-ring rebuild for the marker and Cam Drive ASA | ||
| quantity | location | |
| 1x2mm O-Ring | 1 | Ram Housing to Back Block |
| 1x3mm O-Ring | 2 | Main Body to Manifold |
| 1x4mm O-Ring | 3 | Grip Frame to Body/ Ram Shaft to Pillow Bolt(Friction only)/ASA Main Seal Support |
| 1x4.5mm O-Ring | 3 | ASA to Grip Frame/ Main Body to Manifold |
| 1x7.5mm O-Ring | 1 | Main Body to Manifold |
| 1x9mm O-Ring | 1 | Main Body to Manifold |
| 1x13mm O-Ring | 1 | Ram Housing to Gas InterLock Housing |
| 1.5x20mm O-Ring | 1 | Main Body to Reg Center |
| 005 O-Ring | 1 | ASA Inside Main Seal |
| 008 O-Ring | 1 | Ram Shaft Bumper |
| 010 O-Ring | 5 | Ram Shaft Rear/ Inside of Brass Shutoff |
| 011 O-Ring | 3 | Gas InterLock Button/Reg Center to Main Body/Belville Spring Stack Retainer |
| 014 O-Ring | 1 | Inside Ram Housing |
| 015 O-Ring | 3 | Bolt/ ASA Main Seal |
| 016 O-Ring | 1 | HPR Piston |
| 018 O-Ring | 1 | Reg Center to Reg Base |
| 020 O-Ring | 1 | Volume Chamber |
| 021 O-Ring | 4 | Outside of ram Housing/ Between Ram Housing and Volume Chamber |
| 108 O-Ring | 1 | Inside of Brass Shutoff |
| 114 Square O-Ring | 1 | Front of Volume Chamber-Bumper |
| U-Cup 3/8x9/16x3/32 O-Ring | 1 | Inside Front of Volume Chamber |
| 2x20mm O-Ring | 1 | Inside Back of Volume Chamber |
| Packaging: Single Zip Lock Bag |