MARQ Gen 2 Poppet -VIS Engine Complete O-Ring Rebuild Kit
If any of your Field One Paintball Acculock Inserts are damaged for any reason, we’ll replace it with the same or similar insert for as long as you own your kit. Just return your damaged insert to Field One Paintball at the address below with your name, address, contact info and a copy of your purchase receipt or other proof of purchase. Also include a check for $7 USD payable to Field One Paintball to cover shipping and processing.
Send your damaged insert to:
Field One Paintball
Attn: Acculock Replacement Program
34 De Luca Place Suite D
San Rafael, CA 94901
This offer is only valid for the original owner and is not transferable. Limited to one replacement of each insert per customer. Offer void where prohibited or otherwise restricted by law. Field One Paintball LLC reserves the right to modify or discontinue the terms of the Acculock Lifetime Insert Replacement Program at any time. Program does not apply to product requiring shipping outside of the United States.
Thanks again for your support. If you have any questions about the AccuLock Barrel System, please feel free to contact us by phone or email.
This kit provides one complete o-ring rebuild for the marker and the Cam Drive ASA. See below for description of contents and installation location. To view the Gen 2 MARQ instruction manual click HERE.
|Marq Poppet (VIS Engine) Complete O-Ring Rebuild Kit- Provides one complete o-ring rebuild for the marker and Cam Drive ASA|
|1x3mm O-Ring||3||Solenoid to Manifold to Body|
|1x4mm O-Ring||1||Grip Frame to Body/ ASA Main Seal Support|
|1x4.5mm O-Ring||2||ASA to Grip Frame|
|1x6.5mm O-Ring||1||LPR to Body|
|1x7.5mm O-Ring||1||(SC Only) Outside of Poppet Shaft Rear|
|1x8mm O-Ring||2||Outside of 2959G Adaptor|
|1x12mm O-Ring||1||Outside of Blast Guide|
|1x14mm O-Ring||1||Back Block to Ram Housing|
|1x20mm O-Ring||1||Outside of Brown Donut Seal|
|006 O-Ring||4||Outside of Ram Housing|
|007 O-Ring||2||Outside of Ram Housing(Tight!)|
|008 O-Ring||2||Ram/ Poppet Shaft (SC Only)|
|011 O-Ring||1||Rear of Ram|
|012 O-Ring||1||LPR Piston|
|013 O-Ring||1||Inside of Ram Housing|
|014 O-Ring||1||Inside of Front Volume Chamber|
|015 O-Ring||3||Bolt/ ASA Main Seal|
|016 O-Ring||1||HPR Piston|
|020 O-Ring||1||Inside of Volume Chamber Rear|
|021 O-Ring||2||Outside of Volume Chamber|
|Packaging: Single Zip Lock Bag|
This kit will support the 2012 version of the MARQ ASA (Cam Drive ASA)